Aluminum siding painting in Toronto — fresh colour change on a home by NorthHue Coatings
Premium Painting · Toronto & GTA

Aluminum Siding Painting in Toronto — Repaint vs. Replace, Save 70–90%

Restore faded, chalky aluminum siding to a fresh modern finish — at a fraction of replacement cost.

Licensed & Insured2-Year Warranty24h Response

Schedule a Free Estimate

Free, no-obligation estimate · We respond within 24 hours · Licensed & insured · 2-year warranty

500+

Projects Completed

5.0

Google Rating

24h

Quote Response

2018

Serving Since

Serving the GTA Since 2018
Benjamin Moore & Sherwin-Williams
Fully Insured & WSIB-Covered
2-Year Workmanship Warranty
Our Own Crews — No Subcontractors
Family Owned & Operated

Professional Aluminum Siding Refinishing Across the GTA

Aluminum siding is one of the most durable claddings ever installed on Canadian homes — but over decades of UV and weather, the factory finish chalks, fades, and makes your home look tired and dated. Replacing aluminum siding costs $15,000–$40,000 and takes weeks. Professional repainting from NorthHue Coatings gives you a brand-new look for 70–90% less and a fraction of the time, and the result is indistinguishable from new siding.

Aluminum is a non-porous, smooth metal substrate, and ordinary paint will not bond to it — it peels within a season. The secret to a lasting finish is the prep and the primer. We power-wash with TSP to remove chalky oxidation (the white powder that rubs off on your hand), hand-scrub stubborn areas, scuff-sand the glossy factory finish for adhesion, spot-prime bare aluminum with a corrosion-inhibiting DTM (direct-to-metal) primer to stop oxidation, and then apply a specialty bonding primer across the entire surface before two finish coats.

Unlike vinyl, aluminum has no heat-restriction on colour — you can go as dark as you like without warping concerns. That means full design freedom: modern charcoal, deep navy, warm greige, crisp white, or a bold statement colour. We work with the full Benjamin Moore and Sherwin-Williams palettes and advise on the shade that best suits your home's style, orientation, and trim. Many GTA homeowners use a repaint to modernize a 1970s or 1980s aluminum-sided home into a contemporary look.

Bare spots where the factory finish has worn away are the most common failure point, because bare aluminum oxidizes aggressively and paint will not bond to oxidation. We treat every bare spot with a corrosion-inhibiting DTM primer that neutralizes and seals the metal so the new finish bonds permanently. Without this step, those bare spots peel first and drag the rest of the finish down with them within a few years.

We serve homeowners across Toronto, Etobicoke, Mississauga, Oakville, Brampton, Milton, Vaughan, Markham, Richmond Hill, Pickering, Ajax, Whitby, Oshawa, Barrie, and the entire GTA. Every aluminum siding painting project includes a free written estimate, a clear timeline, and our 2-year workmanship warranty.

Toronto aluminum siding painting project showing smooth acrylic finish

What Our Aluminum Siding Painting Services Include

Our aluminum siding painting crews work in every space with the care and precision you'd expect from a dedicated team of professionals.

Specialty aluminum bonding and DTM (direct-to-metal) primer
Oxidation and chalking fully removed before any coating
100% acrylic latex topcoats in any colour — no heat restrictions
Corrosion-inhibiting primer on bare spots to stop oxidation
Save 70–90% vs. siding replacement
8–12 year durability with proper prep and premium materials
Spray and back-roll application for even, full coverage
Full Benjamin Moore & Sherwin-Williams colour palettes

Aluminum Siding Painting — The NorthHue Difference

Our Aluminum Siding Painting crews arrive early, prep every surface, protect your home, and clean up completely. Because bigger jobs get bigger crews, we deliver the quality you expect on a timeline that's unexpected — and before we leave, a senior painter walks the job with you so it's guaranteed.

Wash & Degrease
Surface Prep
Bonding Primer
Two-Coat Finish
Book a Free Estimate
NorthHue Coatings painters spraying aluminum siding with DTM primer and acrylic topcoat

Our Process

How We Paint Your Aluminum Siding Painting

A clear, proven process that delivers a flawless finish on every aluminum siding painting — from first estimate to final walkthrough.

1

Wash & Degrease

Thorough power washing with TSP removes chalky oxidation, dirt, and weathering — the critical step that makes the primer bond.

2

Surface Prep

Loose paint is scraped, edges feathered, glossy factory finish scuff-sanded, and rusty fasteners treated or replaced.

3

Bonding Primer

A specialty DTM (direct-to-metal) bonding primer is applied — with corrosion-inhibiting primer on every bare spot — for maximum adhesion.

4

Two-Coat Finish

Two coats of premium 100% acrylic latex in your chosen colour, sprayed and back-rolled for even, full coverage.

See the Difference

Before & After

Representative example — drag the slider to see how a fresh coat transforms dull, worn surfaces.

Project Transformation — representative after exampleProject Transformation — representative before exampleBeforeAfter
⇄

Representative example · Project Transformation

Trust & Confidence

Why Toronto Trusts NorthHue Coatings

Every credential, material, and promise — in one place.

Fully Licensed

Licensed painting contractor across Ontario.

Liability Insurance

Full coverage — your property is protected.

WSIB Insured

All crew members covered by workplace safety insurance.

Satisfaction Guarantee

We don't leave until you're completely satisfied.

2-Year Warranty

Written workmanship warranty on every project.

Free Estimates

No-obligation written quotes within 24 hours.

Financing Available

Flexible monthly payments, OAC.

Emergency Availability

Urgent repainting & repairs when you need them.

Benjamin Moore

Premium paints applied as standard.

Sherwin-Williams

Industry-leading products for a lasting finish.

5.0★ Google Reviews

61+ verified reviews from GTA clients.

Before & After Gallery

Real transformations, real results.

7+ Years Experience

Serving the GTA since 2018.

Family-Owned

Local owners who care about every job.

Local GTA Company

Based in Etobicoke, serving all of the GTA.

24h Response Time

We reply to every request within one business day.

Exterior Painting — Rated 5.0 by 61 GTA Clients

Real, verified reviews from Toronto-area homeowners on Google.

NorthHue painted our entire main floor and the lines are razor sharp. The crew was clean, on time, and the walkthrough at the end showed real pride in the work.

Sarah M. · Verified Google Review

Best painters in Toronto, hands down. They covered everything, used Benjamin Moore, and our condo looks brand new. Worth every dollar.

David K. · Verified Google Review

From quote to final coat, professional and communicative. The 2-year warranty gave us confidence. Highly recommend for interior painting.

Priya R. · Verified Google Review

Completed aluminum siding painting project on a Toronto home with a modern colour

Aluminum Siding Painting Cost — What Affects Your Price

Your aluminum siding painting price depends on a few key factors. Our project consultants provide a free, detailed written estimate — no surprises on the day, no hidden costs guaranteed.

Size and number of rooms or surfaces
Surface condition and prep required
Number of colours and coats
Accessibility — ceiling height, stairs, tight spaces
Book a Free Estimate

Find Aluminum Siding Painting Near You

From downtown Toronto to Barrie, our crews paint homes and businesses across the GTA — including Etobicoke, Mississauga, Vaughan, Markham, and Oshawa. Find your local team and book a free estimate.

Flexible Financing Available

Spread the cost of your project with aluminum siding painting payments as low as $99/month, OAC. Get your free estimate to see your options.

See Financing Options

Our Guarantee

Backed by a Written 2-Year Workmanship Warranty

Premium materials, proven prep, and a guarantee in writing — so you book with total confidence.

Every residential aluminum siding painting project is backed by our written 2-year workmanship warranty. If peeling, cracking, or application issues arise within two years, we return and fix it at no charge — no questions, no hassle.

We apply premium Benjamin Moore and Sherwin-Williams paints with proven, surface-appropriate prep, so finishes last. The warranty is our promise that the quality you see on day one is the quality you'll see for years.

2-year written workmanship warranty
Full liability insurance & WSIB coverage
Licensed, background-checked crews
Premium Benjamin Moore & Sherwin-Williams paints
Free, no-obligation written estimates

Products & Materials We Trust

We apply premium, industry-leading products for lasting results on every aluminum siding painting.

Frequently Asked Questions

Can aluminum siding be painted?+
Absolutely. With proper cleaning, oxidation removal, scuff-sanding, and a specialty DTM bonding primer, paint adheres extremely well to aluminum siding and lasts 8–12 years.
Is it better to paint or replace aluminum siding?+
Painting costs 70–90% less than replacement. If your siding is structurally sound, painting is the smart choice and looks indistinguishable from new siding.
How long does painted aluminum siding last?+
With our prep process — oxidation removal, DTM primer, and premium acrylic topcoats — expect 8–12 years before needing a recoat. South- and west-facing walls may need attention sooner.
What colours can I paint aluminum siding?+
Any colour. Unlike vinyl, aluminum has no heat restrictions, so darker colours are safe. Popular choices include charcoal, navy, and modern greige to update dated exteriors.
What is that white chalky powder on my siding?+
It is aluminum oxidation — the factory finish breaking down under UV. It must be power-washed off before painting, or any new coating will bond to the oxidation rather than the metal and peel.
Why are there bare spots on my siding?+
The factory finish has worn away in those areas, exposing bare aluminum that oxidizes aggressively. We prime every bare spot with a corrosion-inhibiting DTM primer to stop oxidation and ensure a lasting bond.
Do you need to remove old paint first?+
We remove loose or peeling paint and scuff-sand well-adhered paint so the new coating bonds. Trying to strip all sound paint is unnecessary and wasteful.
How much does aluminum siding painting cost in Toronto?+
Typically $3,000–$8,000 depending on home size, siding condition, and prep required — a fraction of the $15,000–$40,000 replacement cost. We provide free written quotes across the GTA.

Ready to Get Started?

Free estimates, no obligation. We'll respond within 24 hours.